PROFIBUS DP Slave

Description

The slave device enables the largest multiple cross gateways between PROFINET and PROFIBUS modules which are placed in the backplane. Simultaneously it permanently monitors the segment/network and acts as a repeater when it is used in combination with other communication modules.

Slave device (gateways and remote I/O)

It’s the component of choice to establish communication between multiple PROFINET and PROFIBUS controllers that manage their own specific network. The gateway works similarly to regular DP/DP and PN/DP couplers. The data area between the modules is customized with the help of pre-defined blocks from the GSD files. COMbricks has the advantage that 10 PROFINET / PROFIBUS modules can exchange information. The configuration steps are the same as any other PROFIBUS slave device. By means of the GSD file the respective I/O modules have to be selected in the configuration tool, after which the PLC can make the I/Os available for the software application and the network.

Repeater

The repeater works as any COMbricks PROFIBUS repeater. With the integrated ProfiTrace and the enhanced RS 485 signals it is the best partner you can get for extended and reliable segments.

Application areas

Coupling small machines
Linking networks with different controllers
Coupling PROFINET to PROFIBUS
Coupling PROFIsafe networks to regular networks
Migration from old control systems to new control systems
Quasi master-master communication

This product is UL-listed.

TECHNICAL SPECIFICATIONS

PROFIBUS Slave Device

DP-V0 (certification number: Z01776)
Ident Number: 696F
9.6 kbps..12 Mbps (auto detect and including 45.45 kbps)
Bus address by dipswitches or set slave address command
244 Bytes input and 244 bytes output (128 Bytes I/O per proxy)
Selectable number of I/O bytes: 1, 2, 3, 4, 8, 12, 16, 20, 24, 28, 32, 64 bytes
Fail safe: Outputs OFF, Outputs ON, Keep last value, Custom failsafe value
Simulation input patterns: ON, OFF, Blink, Up counter, Down counter, Zig Zag
Compatible partner/gateway modules: 101-220210, 101-220110, 101-210210, 101-210110, 101-210010
PROFIBUS DP Slave Device GSD filename: PROC696F.gsd (www.procentec.com/downloads)
Maximum number of gateway modules: 9
Words per gateway: 48, 64 words

Repeater

1 RS 485 bus channel with DB9 connector
31 devices/busloads per channel
1200 m cable length (depends on baudrate)
No limit in cascading
RS-485 supported protocols: DP-V0, DP- V1, DP-V2, FDL, MPI, FMS, PROFIsafe, PROFIdrive and any other FDL based protocol
Data delay time: 2.0 TBit at 9.6 kbps .. 3 Mbps; 2.75 TBit at 6 Mbps; 3.75 Tbit at 12 Mbps
Delay time jitter: Max. ¼ Tbit

ProfiTrace Busmonitor

Live List
Statistics
Message recording

Backplane

10 Networks (web server), 4 Networks (dipswitches and web server)
10 Modules (positioned in the first 10 slots)
390 mA current consumption
Power supply: provided through the backplane
Compatible backplane units: 101-200011, 101-200012, 101-200023, 101-200024, 101-200027
Backplane GSD filename: PROC696F.gsd (www.procentec.com/downloads)

Others

Operating temperature: 0..60 °C
Dimensions (LxWxH): 120 x 103 x 25 mm (without backplane)
Weight: 120 g
Head station firmware: 1.275 and higher